12-17-2016 10:34 AM
Pulled out my 3 week old T6i today and turned it on, opened the display, twisted, flipped in to body and the display is upside down. Not sure what I did, can't find any setting or button to fix this. Checked and auto rotate is on.
12-17-2016 11:02 AM
You may want to contact Canon Support, since the camera is so new. Be aware that the display is not designed to rotate 360 degrees.
12-17-2016 11:23 AM
Sent an Email to canon support to hear what they have to say. Unless I find some solution I will also contact B&H about an exchange next week,
12-17-2016 04:51 PM - edited 12-17-2016 10:03 PM
If you don't get email response by Monday AM give Canon a call at 1-800- OK - CANON.
01-07-2017 02:33 PM
09-10-2017 09:47 PM
09-10-2017 10:44 PM
https://www.dpreview.com/forums/thread/3145066
06-13-2018 01:29 PM
06-14-2018 11:24 AM
Hi heatherperron,
For this type of issue contacting our Technical Support department (HERE) is your best bet. A representative can walk you through some troubleshooting steps and provide repair information if necessary.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.