11-28-2016 01:33 AM
After eventually a e-level was added to the 1d series I find it badly implemented to say the least. As far as I could find out the only way to activate it is via custom settings with the "DOF" button. With the result I don't have a DOF anymore!???? that can't be! Canon can't be so d.... there must be another way as most of us use the DOF all the time and to go into the menu and change half the settings can't be the way
11-28-2016 09:28 AM
If you are referring to the viewfinder electronic level display, then the function can be assigned to one of three buttons: DOF Preview, Multi-Function, or Multi-Function 2.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.