03-03-2018 09:52 PM
03-03-2018 10:17 PM
The T6 is an entry level camera model and the built-in flash does not have wireless "Master" capability.
BUT... If your external flash is equipped with slave modes S1 and S2, you should be able to get it to fire in sync with the flash on your camera. Use S2 so that it will ingnore the ETTL pre-flash from your cameras built-in flash.
You will need to set the flash power manually as this type of slave flash has no way of measuring, or automatically adjusting the light output required.
Which flash do you have?
Here is a sample of what S1 and S2 may look like in the flash menu.
03-03-2018 10:25 PM
03-03-2018 10:49 PM - edited 03-03-2018 10:53 PM
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.