12-12-2017 06:18 AM
Hi 🙂
Does anyone know how to transfer photos from a Mac to the 5d MKii please? I've made some aspect ratio templates that I would like to open on the 5d and then mask off the screen so that I can shoot in different aspect ratios and know what I will have to crop in post.
I've tried putting jpg images on the card but the camera says that it can'y open them. Has anyone found a solution please?
Thank you so much,
Jon
12-12-2017 11:42 AM
Wouldn't it be a lot more straightforward to just measure the cropping positions on the screen masks? Nothing more complicated than 4th-grade math is involved.
12-13-2017 06:39 AM
Thanks Bob, as the screen on the 5d is quite small compared to the final film I was hoping to be as accurate as possible. I'll take your advice and get my ruler out.
Thanks again, Jon
12-12-2017 01:15 PM
I suggest you do your editing in DPP since it can make a JPEG the camera cannot understand. The camera is not guaranteed to understand any other flavor of JPEG.
12-13-2017 06:39 AM
Thanks for the reply, I'll try it out 🙂
12-12-2017 03:02 PM
Give Canon a call at 1-800-OK-CANON to be sure, but I do not think it is possible to upload a JPEG and view it in camera. (At least I couldn't make it work when I tried for a friend.)
12-13-2017 06:41 AM
Thanks John, appreciate the reply. Could be something that Magic Lantern can do. If not I might try a hotshoe LCD. All the best, Jon 🙂
12-13-2017 09:17 AM
Just create a 3x4 (ratio, not size!) poster and mask that and shoot it.
Use something like this:
http://www.bobatkins.com/photography/technical/lens_sharpness.html
and you can check your lenses, too.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.