T4i LCD flashes setup info before review of picture

[miket424]

I don't recall this being normal, but I recently noticed that after taking a picture, the LCD would quickly flash the setup screen (aperture, shutter speed, ISO, exposure compensation, etc immediately after taking a picture, then display the picture just taken.  It doesn't happen on every shot, but does seem to occur about 50% of the time.  I've tried to isolate it by changing modes (aperture priority, manual, program) but always with the same result.

The only thing I can think of is I'm shooting RAW + L (18MP) and so maybe there's a delay before the picture can be displayed as the image is being written to the card?  Card is SanDisk Extreme 32gb.

https://www.amazon.com/gp/product/B00MBFPT44/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Any input would be appreciated.

[Waddizzle]

You could try resetting the camera, reformatting the memory card, updating the firmware, or simply ignore it because it ain't really broken, so don't try to fix it.

[TTMartin]

---

@miket424 wrote:

I don't recall this being normal, but I recently noticed that after taking a picture, the LCD would quickly flash the setup screen (aperture, shutter speed, ISO, exposure compensation, etc immediately after taking a picture, then display the picture just taken.  It doesn't happen on every shot, but does seem to occur about 50% of the time.  I've tried to isolate it by changing modes (aperture priority, manual, program) but always with the same result.

The only thing I can think of is I'm shooting RAW + L (18MP) and so maybe there's a delay before the picture can be displayed as the image is being written to the card?  Card is SanDisk Extreme 32gb.

https://www.amazon.com/gp/product/B00MBFPT44/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Any input would be appreciated.

---

Try cycling through the 'Info' button, see if that changes things.

[kvbarkley]

Are these RAWS or JPEGS? Could it take longer to process raws allowing a bit of time for the setup screen to flash on?