05-21-2016 09:14 AM
When shooting high burst mode with my 7D Mark ii, I am not getting optimum performance...the buffer fills fast and backs up ..so that I can't take any more shots...I have turned off the High NOise reduction setting altogether...I usually only have an SD card in the camera. I don't use the other card slot....is it because I didn't have the fastest SD card....For those of you who regularly shoot the 7D Mark ii, do you make a point to always shoot with a SAndisk SD 95 card...? Would i get better performance if I used the CF card slot or both?
Solved! Go to Solution.
06-01-2016 12:30 PM
06-01-2016 01:41 PM
@iris wrote:
OK...so i'll get my first CF card...So Peter there was nothing wrong with your information the first time around..
Don´t forget to check the write speed of the CF card. The SD card you wrote about from Lexar has a write speed of maximum 75 MB/s and a read speed of maximum 150 MB/s.
06-01-2016 09:17 PM
06-01-2016 09:33 PM
I just shot some White Water Rafting action today using both my 1D4 & 7D2. The photos will be used commercially by the rafting company. Ran up against the buffer a few times with the 1D4 but not once using the 7D2 in a similar manner. Fast write speeds are the answer to your problem.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.