08-07-2023 04:06 PM
I looked at the R6 manual and I don't see the answer. What is the default for exposure simulation?
Solved! Go to Solution.
08-07-2023 08:30 PM
08-07-2023 05:03 PM
If no one knows the answer, you could reset the camera settings and custom functions back to default and check what the default is.
08-07-2023 08:30 PM
It's Enabled by default.
Newton
08-07-2023 09:05 PM
Thanks
08-07-2023 09:49 PM
@MelN wrote:Thanks
You are welcome. Generally, the highlighted option in the advanced users manual is the Default setting. I double checked my R6 and R6 II, which haven't been messed with. I use the DOF preview button on my R5 🙂
Default Setting.
Newton
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.