01-23-2021 03:02 PM
I'm having quite the connundrum, and I need to figure out if it's user error or camera fault.
Any time I switch my Canon 80D to the manual setting mode, any picture turns out pure white that I take. I've tried every setting I can think of. If I crank the aperture all the way up I can see some detail, but the picture still turns out almost completely white.
Am I correct in assuming that this is a shutter problem of some sort?
What's weird is that the camera works on the auto settings, but obviously auto isn't why I bought a thousand dollar camera.
Any help is very much appreciate!
Jim
01-23-2021 03:40 PM
@MrSpaceTeacher wrote:I'm having quite the connundrum, and I need to figure out if it's user error or camera fault.
Any time I switch my Canon 80D to the manual setting mode, any picture turns out pure white that I take. I've tried every setting I can think of. If I crank the aperture all the way up I can see some detail, but the picture still turns out almost completely white.
Am I correct in assuming that this is a shutter problem of some sort?
What's weird is that the camera works on the auto settings, but obviously auto isn't why I bought a thousand dollar camera.
Any help is very much appreciate!
Jim
The shutter wouldn't know what mode you were in.
Do you have exposure compensation turned on or have a high ISO set?
If a methodical check of settings doesn't reveal the problem reset all camera settings and custom settings.
01-23-2021 03:41 PM
What are you taking a photo of? Are you indoors or outside? Do you have the ISO value set very high?
Try this... outdoors when sunny, set to f/16, ISO 100 and 1/100 (or 1/125) shutter. That should expose fairly well.
01-23-2021 03:52 PM
Do you understand manual mode? You need to find the right shutter speed to match the aperture you choose in Manual mode & that's done by using the light meter reading you see in the viewfinder display. An all white photo pretty much says to me overexposed which is too slow a shutter speed. That can be the chosen shutter speed, too much exposure compensation or a mix of both.
01-23-2021 04:31 PM
I have a basic understanding, but I am indeed learning.
Thank you for the information!
I bring up the shutter because this is exactly the same issue a friend was having with his 80D, and it was a malfunctioning shutter.
However, I do believe I can eliminate this possibilty (which is good news) because the camera works fine on the automatic settings as seen in this picture below. This is just a test image. I'm going to try defaulting my settings and see if that works for me.
01-23-2021 04:41 PM
Also pay attention to your ISO. A high ISO will overexpose too compared to the same other settings at a low ISO.
01-23-2021 04:48 PM
@cicopo wrote:Also pay attention to your ISO. A high ISO will overexpose too compared to the same other settings at a low ISO.
Thank you very much.
I suspected ISO initially, so I had it way down toward 100.
I do believe I am not paying attention to my light meter near enough. I'm very new to it.
01-23-2021 05:10 PM
We all start off as rookies. Have you watched this?
http://www.canonoutsideofauto.ca/
01-23-2021 06:26 PM - edited 01-23-2021 06:54 PM
The sample image above shot in full Auto does not look right to me.
Please perform a full reset of your camera settings.
What I see:
Auto Lighting Optimizer.
or
White Balance.
I intially though EV settings as well, but don't believe this applies except for P, Tv, Av or M mode.
The 80D should be capable of more. Much more in auto, even when shooting into the sun like you are .
Something is off
~Rick
Bay Area - CA
~R5 C (1.0.9.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
01-23-2021 10:19 PM
@MrSpaceTeacher wrote:
@cicopo wrote:Also pay attention to your ISO. A high ISO will overexpose too compared to the same other settings at a low ISO.
Thank you very much.
I suspected ISO initially, so I had it way down toward 100.
I do believe I am not paying attention to my light meter near enough. I'm very new to it.
You may want to look at these series of videos from Canon at least once or twice.
https://youtube.com/playlist?list=PLp-znpQge8HxrllwXwn9B0Xxf1f7BQnXC
You will want to have your fully charged camera nearby. I recommend a comfortable chair and a tripod.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.