01-14-2019 11:28 AM
Hi, I am attempting to conect my dslr EOS 1300d to my laptop. I have pluged the camera into the comp., gone into EOS utility, clicked on utility launcher, the conect box comes up, I then click on pairing and when the next box comes up, with camera model, mac, IP address, the conect botton is greyed out. Can any one advise please?
01-16-2019 12:29 PM
If you turned WiFi off in the camera, then I don't know. You either need to try another camera or another computer. USB cables can go bad, so I would try another one.
All my cameras work on all my computers, though I don't use EOS Utility.
01-17-2019 05:13 PM
Thank's Kv, I will try another cable.
Kind regards
Trev B
01-17-2019 05:18 PM
Hi, Axepilot, I have tried so many things with this problem and I am reasonably sure I have tried what you are suggesting, However: I will check and see if the wi fi is on or off. Thank you for your input.
Kind regards
Trev B.
01-16-2019 05:57 PM - edited 01-16-2019 06:15 PM
I encountered this same problem the first day I got my T6. The problem was the WiFi - I had to turn it off. It linked right up after I turned the WiFi off.
Not clear from the posts here if you tried this.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.