cancel
Showing results for 
Search instead for 
Did you mean: 

My Canon 7d has started to 'hang' after taking three pictures in a row.

sarahm
Apprentice

My Canon 7d starts to blink busy after taking three pictures in a row.  The screen says busy and the red light is flashing.  

Any ideas what causes this?

I've reformated the CF card and tried using other cards but the same problem happens.

 

I've reset the camera and cleared all the settings.

 

The only way to get the camera to work again is to take out the battery.

 

Any ideas?

3 REPLIES 3

Tim
Authority

Hello Sarah,

 

Thanks so much for writing in.  I am sorry to see that your EOS 7D camera is hanging after taking about three pictures and displays a 'busy' message. 

 

Under normal circumstances, we would want to reset the camera to resolve this error.   I see that you have done some of the steps already.  I would suggest cleaning the lens contacts with a soft microfiber cloth in addition to trying a different lens on the camera. 

If you find it occurring with multiple lenses and multiple cards then we suggest sending the camera into the service center to evaluate this issue.  You can set up a repair online through the link below.  I apologize for any inconvenience that this may cause you.

http://bit.ly/Ne7Psa

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

alexgeorgescu
Apprentice
Hi Sarah,
I think you have the same problem I had some time ago with my 7D.
You see, there are some settings in the camera that slows your camera. Check if long exposure noise reduction is activated (there are two or three settings in the camera regarding this). I don't have the camera near me at the moment so I can't tell you exactly where to look, but you should find those in the camera manual or just searching in the camera menu. Disabling those settings have stopped making my camera slow.

So to answer your questions, that red light indicates that the camera is busy with reducing the noise from your pictures, a process that takes some time.

stmarcink
Apprentice

What firmware version is your 7d using? Wasn't there a problem with version 2.0.0 that's been corrected with 2.0.3?

Announcements
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
03/22/2022: New firmware version 1.2.0 is available for PowerShot PICK
03/16/2022: New firmware version 1.5.2 is available for EOS-R5
03/16/2022: New firmware version 1.5.2 is available for EOS-R6
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.1.1 is available for EOS-R3
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500
12/2/2021: New firmware version 1.1.0 is available for RF 70-200 F4 L IS USM