cancel
Showing results for 
Search instead for 
Did you mean: 

M6 Mark II and Speedlite

nbender182
Apprentice

Can I control an off-camera Speedlite, 430EX III-RT,  with the pop-up flash on my Canon M6 Mark II, or do I need a controller?

 

I'm new and confused by the manual, and haven't been able to find a good answer.  I want to be able to use an off-camera flash with my M6.

 

Thanks.

5 REPLIES 5

Waddizzle
Legend

@nbender182 wrote:

Can I control an off-camera Speedlite, 430EX III-RT,  with the pop-up flash on my Canon M6 Mark II, or do I need a controller?

 

I'm new and confused by the manual, and haven't been able to find a good answer.  I want to be able to use an off-camera flash with my M6.

 

Thanks.


What do the specs or user manual say about it?  Technically, you should be able to go into the Flash menus and answer your own question.  If there is no option in the menu to set the camera as a master, then that is your answer.

--------------------------------------------------------
"The right mouse button is your friend."

The M6 Mk II has no built-in optical wireless master flash capability.  You can use an ST-E2 or ST-E3-RT to trigger your 430EX III-RT.

 

Yes, the M6 Mk II menu supports wireless or optical control of external flash, but not using just the built-in flash You must use some kind of a Canon compatible master in the hotshoe. 

 

The User Manual is rather ambiguous about this subject, and page 298 only refers to using an external flash: 

_001ff.jpg

Mike Sowsun
80D, 5D Mk III

rs-eos
Authority

The 430EX III RT can indeed be used as either a wireless or optical slave (e.g. see page 71 of that Speedlite's manual). 

 

The EOS M6 II appears to support both wireless or optical control of external flash (Canon EX) units.   See page 298 of its manual.

--
Ricky

EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L, 600EX-RT (x6), ST-E3-RT
EOS C70, RF 24-70 f/2.8L IS, EF-EOS R 0.71x

nbender182
Apprentice
Okay, thanks guys. It does seem like I'll need a master controller. A downside with this camera is then, no viewfinder and external flash at the same time.

If you are not afraid to experiment with manual  flash, there are some 3rd party flash units that act as a simple optical slave flash to any bright flash they see. 

They can be set up to ignore the ETTL pre-flash of your M6 II, or you could set your M6 II to manual flash to trigger the simple optical slave flash. With the built-in flash power set very low, it should not be very noticeable in the photo, but still tigger the slave flash.

 

The Godox TT350s is an example of a quality, small flash that could be used this way. 

 

Products_Mini_Camera_Flash_TT350S_02.jpg

Mike Sowsun
80D, 5D Mk III
Announcements

07/28/2022: New firmware version 1.2.1 is available for EOS-R3
07/21/2022: New firmware version 1.6.0 is available for EOS-R5
07/21/2022: New firmware version 1.6.0 is available for EOS-R6
07/21/2022: New firmware version 1.1.0 is available for EOS-R7
07/21/2022: New firmware version 1.1.0 is available for EOS-R10
07/14/2022: New firmware version 1.0.1 is available for CR-X300
07/01/2022: New firmware version 1.3.0 is available for PowerShot PICK
06/30/2022: Service Notice: EOS 70D: Error 70 or Error 80
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
06/07/2022: New firmware version 1.0.3 is available for EOS M50 Mark II
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.
01/05/2022: Welcome to CES 2022!
12/7/2021: New firmware version 1.3.0 is available for Mount Adapter EF-EOS R 0.71x
12/7/2021: New firmware version 1.1.1 is available for CR-N 300
12/7/2021: New firmware version 1.1.1 is available for CR-N 500