05-16-2016 01:08 PM
Recently, after every shot I take the LCD screen is displaying a thumbnail of the photo alongside the RGB meters and all the settings of the camera beneath them. Help! Want to just see the photo in the LCD screen
05-16-2016 01:42 PM
Press the "DISP" button a few times while the review is being shown.
05-16-2016 02:17 PM
Thanks for your prompt reply. Yes I know if I keep pressing the display button it will eventually give me a full screen of the photo but this only recently happened. I have had the camera for about 3 years and am experienced with DSLRs. I want to see the full screen of the photo after shooting, not a thumbnail next to the RGB bars
05-16-2016 02:26 PM
It should stay in the last setting you choose. Once you hit Disp and get the full screen image, just leave it. You might have to do it in playback mode to get it to stick.
05-16-2016 02:36 PM
Nope.
05-16-2016 02:38 PM
Try a system reset.
05-17-2016 09:56 AM
I was wrong, it is the INFO button that needs to be cycled to set the display type.
05-17-2016 02:16 PM
Actually I finally figured out that I had LCD AUTO OFF Enabled - after I disabled it the LCD screen went back to normal. Thanks for all of your assistance!
05-17-2016 02:33 PM
@Babulator wrote:Actually I finally figured out that I had LCD AUTO OFF Enabled - after I disabled it the LCD screen went back to normal. Thanks for all of your assistance!
I would leave that set to turn off after a short time delay. It turns off to help conserve battery life.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.