07-09-2016 02:01 PM
Hello and thanks for advance for your help.
I just got a 70D and am trying to set it up. I am trying to change from One Shot mode to AI Servo. However once in creative mode, lens switch AF selected and selecting the AF all I get for options on the LCD are:()
Tracking, AF( ), AF [] or AF Quick.
The manual says that my options should be: 1 Shot, AI Focus and AI Servo
What am I doing wrong?
Thanks again
- Dan
07-09-2016 02:28 PM
Are you in Live View.
07-09-2016 03:12 PM
Are you looking at the top LCD or the rear one? That info (1 shot AI focus & AI Servo) are displayed on the top LCD of all the cameras I use but I don't have a 70D.
07-09-2016 03:38 PM
And when selecting the AF Button no changes are een on the top digital display - stays as "one shot"
07-09-2016 04:16 PM
You will have to read your manual to be sure, but AI Servo is probably not an option in Live View.
07-09-2016 03:37 PM
Yes I was in live view with the rear LCD active when trying to make changes. After AF button press the options I listed on original post were displayed on LCD screen..
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.