10-02-2020 02:45 PM
I will move from an R to the new R5 once the R5 is readily available.
I have a remote switch RS-60E3 with a plug that looks like a 1/8" stereo plug that fits into the EOS R.
For the EOS R5, it looks like it will take a three pin plug. Ugggh, do I have to buy a new remote switch? I already did that when I went from the Canon 5D mark IV.
My question: Does anybody know where I can get a plug or converter that woulod plug into a 1/8" plus on the RS-60-E3 and convert it to a three pin?
Thanks,
Jim Patterson
cogent@cox.net
10-02-2020 03:05 PM
A Bluetooth device makes for a very good remote shutter release. Try it with your EOS R.
10-02-2020 03:09 PM
... I was hoping to be able to use my RS-60E3 with the 1/8" plug on the new EOS R5.
I tend to avoid wireless. For instance, I use a wired keyboard and wired trackball with my iMac. No failure to connect problems.
JGP
10-02-2020 03:23 PM
I don't think so, they only make the RA-E3 that goes the other way.
That said, the TC-80N3 is a good remote trigger/intervalometer.
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.