04-22-2018 09:05 PM
Is there a Canon camera that will allow you to set the start, end points and number of shots to take?
Solved! Go to Solution.
04-23-2018 01:46 PM - edited 04-23-2018 01:51 PM
Yes. Use the app DSLR controller and you have the focus stacking function. There are some discussions here :
04-23-2018 08:56 AM
04-23-2018 10:10 AM
You can do it with any camera in post.
04-23-2018 01:28 PM
I think my CamRanger does this (I don't use it for that), but that's an expensive solution.
Refocusing a lens can cause some difference based on focus-breathing (that's where the true focal length changes just be shifting focus). If you are interested in focus-stacking specifically for macro photogoraphy, the common solution is to use a "focus rail". This mounts the entire camera on a rail (attached to a tripod) and the rail allows the entire camera to slide forward/backward (my rail has about 11 cm worth of travel). You shoot, move it a few millimeters & repeat until you have enough frames. But it's not automatic.
04-23-2018 01:46 PM - edited 04-23-2018 01:51 PM
Yes. Use the app DSLR controller and you have the focus stacking function. There are some discussions here :
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.