12-19-2013 09:12 PM - edited 12-19-2013 10:30 PM
I´m looking for an eyepiece extender like the "Canon Eyepiece Extender EP-EX15", but for the 5D mark III.
Thanks for any help.
Regards,
Cunha
12-18-2016 11:46 AM - last edited on 01-18-2017 12:14 PM by Stephen
It has been a while but for those who own a 7D/Mark II, 5D Mark III/Mark IV, 1D X/Mark II and other 1D series, we're looking at 3D printing the eyecup extender since JJC and Goja no longer makes them. Here is the post
[Removed link per the FORUM GUIDELINES]
01-18-2017 12:03 PM - last edited on 01-18-2017 12:15 PM by Stephen
I just posted video of the 3D printed eyepiece extender - [Removed link per the FORUM GUIDELINES]
04-06-2014 05:13 PM
For the Canon 5D Mk II you need the EP-EX15 II.
See here:
http://www.canon.de/For_Home/preislisten/
Download and go to page 9 . . .
04-06-2014 05:16 PM
Thanks.
Got this one and works:
Cheers.
12-02-2018 09:44 PM
I couldn't find anywhere an eyepiece extender for my 5DIII/IV.
I am tired of cleaning the rear LCD so I made one for myself. I will use it for the time being until I find a good one.
I found somewhere a piece of foam rubber. I cut it to shape. Made a hole and glue everything together with double sided tape and crazy glue.
For this project, I have to tear apart an old Canon original eye cup and made it as the base for clicking onto the camera. I used another Canon eye cup fixing it to the other end. Do not use cheap eye cup for viewing. The rubber material is not reliable and may cause harm to your eye(s).
There is no correctional lens and thus no magnification. Tunnel effect is minimum. You may find a thinner foam rubber which will improve the tunnel effect further.
I painted the foam rubber black to avoid reflection.
Then the rest is cosmetic.
12-03-2018 05:59 AM
12-03-2018 07:50 AM
Where to buy one ? My DIY is just for temporary use.
12-03-2018 08:12 AM
http://www.jjc.cc/index.php/Product/product_info/id/1454
I tried this brand.
But as I told I gave up. It´s cumbersome to put inside my bag.
12-03-2018 09:31 AM - edited 12-03-2018 09:48 AM
@Cunha wrote:http://www.jjc.cc/index.php/Product/product_info/id/1454
I tried this brand.
But as I told I gave up. It´s cumbersome to put inside my bag.
Unfortunately, that doesn't fit the 5D Mark III/IV.
12-03-2018 09:40 AM
@1kindphoto wrote:
Unfortunately, that doesn't fit the 5D Mark III/IV.
You are right. Thanks for the 3D version. I also find this one :
Think Tank EP-20 Hydrophobia Eyepiece for Canon
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.