11-11-2017 12:17 PM
So a few weeks a ago I turned on my camera and I went to manual, when I looked, the Exposure comp logo was gray, but the AEB was white and still worked... I have a canon rebel t3. ONLY the AEB works now and the Exposure comp logo is still gray. Can someone help me???
11-11-2017 12:48 PM
That’s normal. It seems that some Rebels do not allow for AEC, Automatic Exposure Compensation in Manual mode. I would assume that the operator can dial in compensation manually. Unfortunately, that does not work out very well if you are using ISO Auto in Manual Shooting Mode, something which I frequently do.
11-13-2017 12:42 PM
Yes, but it was working before, and then I clicked something and it didn't work...
11-13-2017 12:53 PM
Not in M mode, it wasn't:
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.