05-03-2017 01:27 PM
05-03-2017 02:01 PM
You are using the term "lens" -- normally a lens is attached to the camera body directly. Are you wanting an adapter for the thread-on filter?
What you are looking for is called a "Step up ring" -- but note they're typically "step up" and not "step down". You'll get vignetting (dark areas around the edges and corners) if you try to use filter which is smaller than your lens' filter diameter. Going larger typically isn't a problem.
So I'm not sure you'll find such a thing as a "58-55mm step down ring".
05-03-2017 02:11 PM
Your T3 uses the EF-S lens mount. What lens do you want to try?
05-03-2017 02:20 PM
05-03-2017 02:21 PM
05-03-2017 03:40 PM
"55 mount" means nothing. If it is a Canon Lens for an SLR it is either an EF, EF-S EF-M or FD.
05-03-2017 04:00 PM - edited 05-03-2017 04:03 PM
It sounds like its one of those auxilliary lens gadgets that advertise for telephoto. Basically a magnifying glass that screws on the front of a lens.
Quality generally isn't very good from them, but since you already have it, Google "58-55mm step down ring"
B&H has them; can't link to it - against forum rules.
05-03-2017 03:59 PM
05-03-2017 04:29 PM
05-03-2017 07:23 PM
@WanderinNomad wrote:
It says 70-210 MACRO and attaches to a body with 55. I have pix if that would help.
Hmm. Does it have a make and model number? It almost sounds like an old film lens from 30 years ago, or so, which means it is most likely not worth the time and effort to try to use it.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.