12-13-2023 01:26 AM - last edited on 12-14-2023 08:23 AM by Danny
beginner here, im needing help!
a couple days ago I took family photos and before the session I changed my settings to custom (because my camera doesn't have kelvin setting) and I think it ruined my photos, when I apply my preset, the image turns green and I'm at a loss on what to do..
12-14-2023 10:51 AM
If the OP is using raw there is no reason to worry where WB ay all. Leave it on daylight. In post set it wherever you like. This is very basic and very simple. Unless there is a need to get accurate color simply watch the image on the monitor and put it where it pleases you.
12-14-2023 11:00 AM
" I think it ruined my photos,..."
To the OP if yo u/l the photo to a Dropbox and give me the link, I can check to see if the photo is recoverable.
If you prefer do it in a PM. I am glad to do it as I do it all the time for folks.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.