02-23-2023
07:56 AM
- last edited on
02-23-2023
08:52 AM
by
Danny
Hey,
I was wondering if it would be possible to set up multiple manual adjustaments and change them using the dial...
Like there's so many scene modes, but I only use the M one...
Example: let's say I am shooting an event, and people pose for photos indoor and outdoor, and I have to switch between the scenes and get the shoots quickly... I probably would have something like,
1. 1/250 f 1.8 ISO 100
2. 1/125 f 1.8 ISO 400
So I don't have to be always pressing multiple buttons to switch on to these settings, it would be useful to have something like M1, M2...
Is there a way to set up this?
Thank youuu
02-23-2023 08:06 AM
What specific camera do you have? Custom shooting modes may be a solution to this.
02-23-2023 08:09 AM
RP
02-23-2023 08:43 AM
You should be able to do this via custom shooting modes (C1, C2, and C3 on the mode dial). See page 408 of the User Manual for details on how to set that up.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!
EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STMCanon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.