cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS R6 WiFi failure (2nd camera)

ntingle
Contributor

My new R6 will not detect or find my home WiFi (or any other wifi) network. It shows "Search fo access points" and "Searching..." and then nothing.

 

It *will* allow the phone to connect to it, if I use the "connect to smartphone" method (this is where the camera starts it's own wifi nertwork). But I cannot connet to my wifi to, e.g., transfer via ftp, as I did with my 5D4. I have tried with both 5GHz and 2.4GHz wifi networks.

 

This is the second camera with this symptom (the first one wouldn't even allow the local connection). Canon support told me to send the first one back. 

 

I have updated the firmware to 1.1.1. No difference.

 

Any ideas? Surely I can't be the only one. My phone can see multiple wifi networks.

33 REPLIES 33


@arcticleo wrote:

I have exactly the same issue; can connect to phone, but not to wifi, and after choosing to search for access point, it just sits there without anything seemingly happening.


The built in Wi-Fi inside of cameras is not fully networkable.  It merely uses the same technology to communicate with another device, NOT A NETWORK.  Look at the Wi-Fi as a substitute for Bluetooth or NFC, but has a longer wireless range.

--------------------------------------------------------
"The right mouse button is your friend."

Apertura86
Contributor
This statement is not accurate.

When the 5GHz Wi-Fi is working and connected via 802.11AC the camera transfers CRAW files via EOS Utility at the same rate or faster than USB 3.0 cable.

Apertura86
Contributor
Mixed up the threads thought this was on the R5 discussion. It’s also exhibiting Wi-Fi connection issues

ntingle
Contributor

Hey I just downloaded the 1.4 R6 firmware and the WiFi works now! Finally!

Announcements