11-15-2023
02:36 PM
- last edited on
11-15-2023
02:39 PM
by
Danny
We do nighttime auto racing photography, mostly with the 7D Mark II at 1/250th second synch and a Norman 400B battery portable strobe. This is a manual strobe that requires a synch cord connection. We're considering the purchase of an R7 (for the high-speed synch) or an R6II for next season. The AD-E1 adapter does not appear to have a PC port. Does Canon make a multi-function shoe to PC synch cord adapter? Thank you.
Solved! Go to Solution.
11-15-2023
05:26 PM
- last edited on
11-15-2023
05:28 PM
by
SamanthaW
The Canon OA-2 DOES NOT have a PC cord connector. The thing on the front is a Canon TTL connector.
Here are two PC adapters that also convert flash trigger voltage down to 6 volts:
[Posted screenshots of products to facilitate conversation]
11-15-2023 03:56 PM
I cannot find documentation on this device.
11-15-2023
05:26 PM
- last edited on
11-15-2023
05:28 PM
by
SamanthaW
The Canon OA-2 DOES NOT have a PC cord connector. The thing on the front is a Canon TTL connector.
Here are two PC adapters that also convert flash trigger voltage down to 6 volts:
[Posted screenshots of products to facilitate conversation]
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.