08-30-2024 12:28 PM
I downloaded the new firmware to shoot stills and a documentary, and I see the overheating light flashing in both stills and video modes.
The settings on the video mode were in a house (it was a bit warm, but nothing extreme). The camera was recording at 4K FINE, 24 fps.
For photos, I had my camera on a strap the whole time, and the grip felt very warm; I hadn't felt the camera heat up that much.
08-30-2024 02:44 PM - edited 08-30-2024 02:45 PM
What is the ambient room temperature?
How long was the camera powered up?
08-30-2024 02:49 PM
The ambient temp was 75 when shooting stills and it was on for 3 to 4 hrs and had it to turn off after 1 min of idle.
I've always had it like that and never a problem. Even before firmware 1.6 never happened to me.
for video i would say about the same but indoors
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.