04-26-2025
01:14 PM
- last edited on
04-27-2025
08:19 AM
by
James_C
My Canon R5 takes one shot only in Manual, SIngle Shutter and electronic Modes. Single shutter should be around 12 fps and electric shutte raround 20 fps. I can't find in the menu how to specifiy the shot rate--I would assume that selecting single or electric shutter should suffice. I have gone over the setup at least 3 times; I have also reset the camera 3 time, and I have reinstalled the firmware--All to no avail. Please help!? I was hoping to fix this myself, but I have run out of ideas. Please help!? Thanks
Solved! Go to Solution.
04-26-2025 01:38 PM - edited 04-26-2025 01:40 PM
What is your drive mode setting?
04-26-2025 08:39 PM
A quick and easy way to find out if your settings are an issue is to test the camera in Intelligent Auto Mode, the green [A+] mode. Try testing different drive modes.
04-26-2025 01:38 PM - edited 04-26-2025 01:40 PM
What is your drive mode setting?
04-26-2025 04:28 PM
I get one shot only, in any shutter mode, I think I have trouble shot effectively. The camera has not been dropped or otherwise been subjected to any adverse conditions. Either something is wrong with the camera, or I have unknowingly done something to the camera.
04-26-2025 08:39 PM
A quick and easy way to find out if your settings are an issue is to test the camera in Intelligent Auto Mode, the green [A+] mode. Try testing different drive modes.
05-04-2025 10:47 AM
This helped, Thanks
03/18/2025: New firmware updates are available.
EOS R5 Mark II - Version 1.0.3
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
01/27/2025: New firmware updates are available.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.