02-15-2023
10:58 AM
- last edited on
02-01-2025
08:40 AM
by
Danny
Hi,
I like to shoot in manual mode but with auto ISO. Can anyone tell me if it is possible to customise a control to enable exposure compensation. I have seen a video on this for the RP but I cannot find how to do it on the R. Grateful for any help.
02-02-2025 10:18 AM
Thank you.
02-02-2025 10:18 AM
Thank you.
02-02-2025 11:08 AM
Thanks again for your help.
I don't know why but if I follow these instructions (https://www.youtube.com/watch?v=kRr5toF51Rc) and set the Control Ring Dial on my Canon 35mm RF lens to Exposure then it doesn't do anything.
I've tried in Av (in which I shoot) and Manual mode. The only way to adjust it is to hit the exposure box on screen and then rotate the mode dial.
02-02-2025 11:26 AM
OK, so I have figured out - the Manual exposure adjustment is only available AFTER one has half-pressed the shoot button (ie after engaging the autofocus once)
11/20/2025: New firmware updates are available.
EOS R6 Mark III - Version 1.0.1
EOS R5 Mark II - Version 1.2.0
PowerShot G7 X Mark III - Version 1.4.0
PowerShot SX740 HS - Version 1.0.2
10/15/2025: New firmware updates are available.
Speedlite EL-5 - Version 1.2.0
Speedlite EL-1 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.2.0
07/24/2025: New firmware updates are available.
07/23/2025: New firmware updates are available.
7/17/2025: New firmware updates are available.
02/20/2025: New firmware updates are available.
RF70-200mm F2.8 L IS USM Z - Version 1.0.6
RF24-105mm F2.8 L IS USM Z - Version 1.0.9
RF100-300mm F2.8 L IS USM - Version 1.0.8
RF50mm F1.4 L VCM - Version 1.0.2
RF24mm F1.4 L VCM - Version 1.0.3
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.