07-26-2023 02:53 AM - last edited on 07-26-2023 08:04 AM by Danny
The shutter button on my Canon R will not take a photo. I can back button focus, but when I press the shutter nothing happens. Any ideas?
Solved! Go to Solution.
07-26-2023 03:57 PM
07-26-2023 03:22 AM - edited 07-26-2023 03:22 AM
Hi Clarissa, and welcome to the forum:
Have you checked to see if the shutter button has been customized from its default to disable focus, leaving you with BBF, as you indicate.
07-26-2023 04:47 AM
Hello, yes. I wasn’t able to find anything that would say it was disabled.
07-26-2023 08:44 AM - edited 07-26-2023 08:49 AM
See #2 below for customizing the camera's buttons. You may want to assign the shutter button half press to focus and metering start. It is in the camera menus:
07-26-2023 03:47 PM
Hello, yes, my shutter button is assigned to half-press metering and AF start
07-26-2023 03:57 PM
I figured it out. I was in movie mode...
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.