cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS 6D LCD have pixel lines

shafayjaved
Apprentice

Hey! So I have been using Canon 6D, yesterday I recharged the battery and turned camera on after a month and I noticed there were few pixel lines at the bottom of the LCD. It wasn't there before a month neither I have dropped it nor it got pressed or something. I was also using screen protector. 

But somehow there are like few pixel lines (green, red colored) at the bottom which are really annoying. Don't know if its a hardware fix or software.

Can anyone help?

4 REPLIES 4

kvbarkley
VIP

There is not much you can do except send it in for repair. Just be thankful it is not on the images.

Hey! Replying after a while, so i figured out a thing that the lines just vanished in Summer.

They never came back in Summer and I thought the problem is solved. 

But they came back in winters 🌝

Now whenever i place the camera in sun or heat it a little with hair dryer, the lines start to disappear. 

But they next day whenever i turn on the camera, they came back. 

Don't know what this sorcerery is. 

I am not using my camera regularly. I use it after a month or two. 

Is it something related to its usage? Am i not using it enough which is causing problems? 

ebiggs1
Legend

Anything can fail.  It just happens sometimes. Ever walk in a room and hit the switch and the light bulb just burns out? It happens. Hopefully it is an easy fix. Good luck.

EB
EOS 1DX and 1D Mk IV and several lenses!

Hey! Replying after a while, so i figured out a thing that the lines just vanished in Summer.

 

They never came back in Summer and I thought the problem is solved. 

 

But they came back in winters 🌝

 

Now whenever i place the camera in sun or heat it a little with hair dryer, the lines start to disappear. 

 

But they next day whenever i turn on the camera, they came back. 

 

Don't know what this sorcerery is. 

 

I am not using my camera regularly. I use it after a month or two. 

 

Is it something related to its usage? Am i not using it enough which is causing problems? 

Announcements

03/30/2023: New firmware updates are available.

EOS R3 - Version 1.4.0

EOS R5 - Version 1.8.1

EOS 1DX Mark III- Version 1.7.1

Speedlite EL-1 - Version 1.0.2

03/30/2023: Product Advisory for EF50 F1.2 L USM

03/30/2023: Product Advisory for EOS R10


03/28/2023: New firmware version 1.0.3.1 is available for EOS-R5 C
03/14/2023: New firmware version 1.8.1 is available for EOS R6
02/24/2023: We've updated Share Your Photos

2/07/2023: New product announcements!

EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.