04-27-2015 03:53 PM
I've registered to this community hoping that someone could help me around the continuous shooting on my Canon EOS 650D.
The camera can only process 3 to 4 shots at 5 fps (as it should be), but right after that the burst rate slows down significantly.
This occurs only when i'm shooting in RAW format, shooting in JPEG is ok, but that is not my point. I have also tried to disable the lens aberration correction in the menu, by disabling the peripheral illumination and the chromatic aberration. Still nothing.
I use an SDHC Class 10 card, with a writing speed of 30MB/s.
Is this normal? Can someone please help me?
Thank you in advace for your help.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 18.104.22.168
PowerShot SX420 IS - Version 22.214.171.124
PowerShot 620 HS - Version 126.96.36.199
PowerShot SX720 HS - Version 188.8.131.52
PowerShot G1X Mark III - Version 184.108.40.206
PowerShot G7X Mark II - Version 220.127.116.11
PowerShot G9X Mark II - Version 18.104.22.168
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.