11-07-2022 11:43 PM - last edited on 11-08-2022 09:09 AM by Danny
Hi all, I need help with an issue that I am having on a Canon EOS4000D camera which is showing a solid white line on the camera display screen but it's not showing on the photos on the SD card. What seems to be the cause of this issue?
11-08-2022 12:04 AM - edited 11-08-2022 12:05 AM
A image of the "solid white line" might be helpful, but if the stored photos look fine, it's obviously not a sensor issue. It's more likely an issue related to the LCD display system. It may be the LCD panel itself, a bad ribbon cable or connector or a failing display driver IC. You might try resetting the camera to factory settings, and/or removing the battery and switching the camera on for 10 sec., then off and re-install the battery. However, it's much more likely your T100/EOS 4000D has a hardware failure and will need service.
08-11-2024 01:53 AM
Hello,
i'm having the same issue with Video mode. a fine white line appears at the bottom of the screen.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.