cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EOS 2000D Stuck on Manual Focus

BigShug19
Contributor

I have a Canon EOS 2000D which seems to be stuck on MF. I’ve pressed Q and gone through the process of choosing ONE SHOT and pressing SET but doesn’t seem to work. When I go back to display it still shows MF. Can anyone out there help me?

9 REPLIES 9

rs-eos
Elite

What lens are you using?  There should be an AF/MF switch on the lens itself.  Although, some lenses are manual only.

--
Ricky

EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L, 600EX-RT (x6), ST-E3-RT
EOS C70, RF 24-70 f/2.8L IS, EF-EOS R 0.71x

BigShug19
Contributor

I’ve been using the Canon 50mm and I’ve changed the AM/FM on both body and lens in the hope that would correct it.

Which Canon EF 50mm. Please list the full name of the lens. Canon has released different revisions over the years.


-Demetrius

Current Gear: EOS 5D Mark IV, EF F/2.8 Trinity, EF 50mm F/1.8 STM, EF 85mm F/1.8 USM, 470EX-AI & 600EX II-RT

Retired Gear: EOS 40D

Canon EF 50mm 1:1.8 STM

Not following your mention of AF/MF on the body.  What exactly are you changing on the body?

--
Ricky

EOS 5D IV, EF 50mm f/1.2L, EF 135mm f/2L, 600EX-RT (x6), ST-E3-RT
EOS C70, RF 24-70 f/2.8L IS, EF-EOS R 0.71x

On the screen it says MF and when I press the Q to change it to ONE SHOT I press set but when it goes back to the display it still says MF.

Apologies all. I seem to have found out where I was going wrong.

Glad to hear that!  Please let us know what you did to correct it so that others who might be encountering the same issue can resolve it, too!

BigShug19
Contributor

It was after many attempts that if I set the lens to AF and the camera to M it allowed me to change the AF operation to ONE SHOT, AI FOCUS OR AI SERVO which is what I was trying to do.

Avatar
Enter for a chance to win
Announcements