01-07-2017 03:12 AM - last edited on 09-26-2023 11:48 AM by Danny
01-07-2017 12:46 PM
@Tessanne wrote:
I've tried both. Which is best?
Either one, as long it is not a microSD card. If it takes a long time without a card, then the camera is faulty, which I suspect it is.
01-07-2017 09:32 AM
Is the card access light blinking during the startup time?
01-07-2017 10:47 AM
What type of memory card are you using? Only use name brand, full size cards. Stick to cards 32 GB, or smaller. Be sure to perform a "low level" format in the camera before use.
01-07-2017 10:56 AM
01-07-2017 10:58 AM
duplicate post.
01-07-2017 11:09 AM
01-07-2017 11:35 AM
01-07-2017 12:20 PM - edited 01-07-2017 12:20 PM
@Tessanne wrote:
New card same problem. Sometimes I have it on live view and camera goes into menu mode , goes black back screen then goes back to menu, very odd.
Do you LOW LEVEL format the memory cards in the camera? Most memory cards have some residual formatting on them from factory testing during production. The residual formatting needs to be completely erased.
01-07-2017 12:35 PM
01-07-2017 12:46 PM
@Tessanne wrote:
I've tried both. Which is best?
Either one, as long it is not a microSD card. If it takes a long time without a card, then the camera is faulty, which I suspect it is.
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.