02-25-2016 07:49 PM
Hi guys,
I have a T2i, which I recently had to take to the repair center due to some issues with the memory card chip. However, now everytime I put it into video mode, the screen turns black and the camera stops working altogether. To make it work again, I have to remove the battery and turn it on again. After that, there's a sound as if the shutter was stuck.
All the information I've found is about the "Recording was stopped automatically" message, but this isn't the issue here.
Does anyone know what should I do about this?
Thank you!
02-25-2016 08:26 PM - edited 02-25-2016 08:28 PM
Did you install the Magic Lantern ?
Have you tried using a new card ?
Try clear all camera settings and clear all Custom Tunc. (C.Fn)
02-25-2016 09:03 PM
Thanks for your reply!
So I haven't installed any add-ons and I did try using a new card.
I just tried the last option, clearing all settings, but it's not working.
02-25-2016 11:25 PM
02-26-2016 04:31 PM
It might still be under the warranty for the first repair.
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.