09-05-2022 07:24 PM
I have been getting err70 ever since I've used my Canon r5 out of the box and I have no idea how to fix it. I get it once every 30-50 frames
09-05-2022 08:17 PM - edited 09-05-2022 08:20 PM
According to a support site (Link here ), Error 70 is an image-related issue, but that could be for a bunch of reasons: and these are the easy options for you to consider:
a) A memory card that is not working properly. This can be caused by a configuration error, a bad card, or using a micro SD card with an adapter - not recommended, always use full-size cards
b) an error with the lens. Is the lens you are using a Canon native lens or a 3rd party one? Is it an EF or EF-S unit attached by an adapter, and if so, is that a Canon adapter or made by a 3rd party?
c) a battery related issue - less likely I would have thought but working down through the options.
I would suggest exploring each of these possibilities and if none of them seem to be an obvious point of issue, then call Canon support 1-800-OK-CANON
09-05-2022 10:00 PM
Thank you for taking the time to reply. I use only RF lenses so I will rule out your second point and it does it with all of my batteries so I believe it could be my memory card. Thank you again for your response!
-Ben
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.