07-05-2015 06:42 PM
I recently shot a job with my 70D, came home and uploaded my photos with a card reader. Today, I reinserted my card and camera would not turn on. I put batteries, including my fully-charged backup battery, in charger. I inserted the two were fully charged batteries and it's still not working. I found out my 3rd-party batteries have not communicating with my camers. Only when I inserted my Canon battery in the single-battery postion, does it work. I just ordered two more Canon batteries
07-07-2015 12:51 PM
Hi zimbobway!
Thanks for posting.
Am I to understand correctly that you are using a battery grip with the camera and it will only power on with a single battery in the battery compartment of the camera without the battery grip installed?
If so, are you also using a third-party grip or are you using a Canon grip?
Does the grip power the camera on when only Canon batteries are used in it?
07-22-2015 01:26 PM
MY CANON 70D STOPPED WORKING BUT IT DOES NOT WORK WITH A/C ADAPTER OR WITH 2 CHARGED BATTERIES, IM NOT GETTING ANYTHING AT ALL.
05-05-2016 12:31 AM
same problem
05-05-2016 08:49 AM
Both of you,
Sounds like you have third party batteries and battery grip. Ditch both or all of these. Use only real deal Canon grip and batteries. Plus, hope the grip didn't ruin your 70D already!
12/18/2024: New firmware updates are available.
EOS C300 Mark III - Version 1..0.9.1
EOS C500 Mark II - Version 1.1.3.1
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.