cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon 5D Mark III Back Focus Button Sticking

llehmann
Enthusiast

Canon 5D Mark III back focus button is starting to stick inside the body and not pop out. This is starting to happen on 2 of my cameras. Im not putting blame on Canon for this as they've both been used a lot and it's time to fix the problem before I have a major malfunction. 🙂

I've cleaned the buttons up the best I could, but I think it's time to disassemble and clean them or figure out what's making them stick and not pop out nice and smooth. 

Anyone have this or deal with this problem before? I was looking online at disassembly videos and it doesn't look terrible difficult to get at the button.

Thanks for any advice!



Has anyone come across this problem? 

3 REPLIES 3

Nick2020
Product Expert
Product Expert

Hi llehmann,

 

Thanks for checking in with us.

 

As you might imagine, we aren't able to provide support on disassembling the camera since that could lead to more damage to the equipment or to personal injury, in certain limited cases.

 

If you decide to get the camera serviced, I would suggest that you email us to get the latest repair details for your area:

eosdigitalsupport@cits.canon.com

llehmann
Enthusiast

OK... just to keep everything "fair"... I've been told that my 24-70 F2.8 II lens that broke on Dec 1, 2020 does not have a faulty ribbon cable. 
All tho the symptoms are exactly the same. The lens will only shoot on F2.8. Otherwise it will give you an Err 01.

So, stay tuned on to why if failed this time?!?!

Now... in the spirt of "fairness"... another one of my lenes displayed the symptoms of the dreaded broken flex cable at a wedding this week (first week in Jan 2021). Yes, one of my stable of 24-70 F2.8 II lenes that I have. Not that we are keeping track... but my guess is this is the #8 repair for this reason. We will see if its the ribbon cable again or something else. 

 

Again... will fire at F2.8 otherwise you get an Err 01 on the camera. 


Now, lets talk a little bit about my backup lens. The tank that drives in reverse! (Referring to the telescopic focus being backwards). My 24-70 F2.8 version 1... regular flavor. I've had it for so many years and put it into retirement when the new II version came out. Used mainly as my backup lens. It's always been there for me. Never failed. Never had these issues. Just saying!

 

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.