05-11-2013 05:58 PM
:-)It will only autofocuse in A+ and NOT in any position. I´ve tried with my 24-7mm and my 100-400 mm origianl canon lenses.
What is wrong?? The camera is brand new Comming from a 40D.. Have I missed something in the menu? and a upgrade to latest firmware didn´t fix the problem..
Does anyone has a solution?
Thank you in advance..
Solved! Go to Solution.
05-12-2013 10:57 AM
To change you go to C.Fn2 menu (the 2 of 4 menu with the Orange Camera symbol) the go to "Custom Controls". The first one is the Shutter butt. half-press, choose AF On and Metering. I'm surprised that "Clearing All C.Fn" didn't work but then I never had to use it yet... :). Please let me know if this solves your problem.
05-12-2013 04:21 AM
Even though it's brand new, it might have been tested by Canon and left some options on by mistake. From what you described, the focus by shutter button may have been disabled. The only mode that AF will work is the green A+ as you mentioned. Try focusing using the AF-ON button. It should focus with that unless that has been changed also.
On purpose, I disable the focus by shutter button and use the AF-ON button for focusing. This gives me better control of the focus. So when I hand my camera for someone to take a picture with me in it, I would switch to the A+ mode otherwise I would be in an out of focus picture
A firmware change will not reset the custom settings. You will need to perform a reset all (the yellow wrench menu SETUP 4 of 4 (Clear all camera settings). Also try Clear All Custom Func. (C.Fn) in the Orange Camera menu.
That should do it.
05-12-2013 04:50 AM
05-12-2013 10:57 AM
To change you go to C.Fn2 menu (the 2 of 4 menu with the Orange Camera symbol) the go to "Custom Controls". The first one is the Shutter butt. half-press, choose AF On and Metering. I'm surprised that "Clearing All C.Fn" didn't work but then I never had to use it yet... :). Please let me know if this solves your problem.
05-12-2013 04:06 PM
Ohhh.. thank you... You are my Hero.. It worked! ´How will the world be without the Internet and forum
07-12-2016 01:15 PM
Thank you so much. This helpe me!
03-04-2017 04:11 PM
Thank you so much for this invaluable information. We have now successfully reset my hubbys camera that had this exact problem and we thought it was a fault. It is now working as it should:) Thank you once again.
12-10-2016 07:17 AM
I'm having a problem with the camera not showing the red box focusing point. Is this a toggle switch? Can anyone help me?
08-18-2015 10:18 PM
08-19-2015 07:44 AM
@Dpedey15 wrote:
My camera dropped today from short distances. But the eye focus was off. I could focus it with the lens and make get a clear shot with the screen. But through the eye lens it was still blurry. What should I do about this? Any suggestions?
Unless your camera is so old and inexpensive that the exercise isn't worth the cost, my suggestion would be that you get it fixed.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.