09-01-2014 06:40 PM
Hello everybody!
I am from Costa Rica and this is the first time that I post something here.
Yesterday I dropped my mark iv with the old version 600f/4 and thank God nothing happened to the lens but the camera shows a crack on the lower part and the small LCD, the battery is also broken but the camera seems to be working with no problem. We don't have a Canon repair shop in my country and I wondered if Canon can put a new alloy body and LCD on this camera?
MANY THANKS FOR YOUR REPLY!
JuanKgigo
09-01-2014 07:58 PM
09-01-2014 08:01 PM - edited 09-02-2014 01:40 PM
Thanks cicopo.
The crack is visitble and the LCD is broken also, still working but broken and as it can be seen, the battery compartment is also twisted.
09-01-2014 08:08 PM
Agree with your assessment. Hopefully a Canon moderator can set you up with a service depot's address.
09-01-2014 08:15 PM
Many thanks cicopo!
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
09/26/2023: New firmware updates are available.
CN-E45-135mm T 2.4 L F - Version 1.4.0
EOS 1DX Mark III - Version 1.8.0
08/18/2023: Canon EOS R5 C training series is released.
07/31/2023: New firmware updates are available.
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
PowerShot Elph 360HS - Version 1.1.0.0
PowerShot SX420 IS - Version 1.1.0.0
PowerShot 620 HS - Version 1.1.0.0
PowerShot SX720 HS - Version 1.1.0.0
PowerShot G1X Mark III - Version 1.1.0.0
PowerShot G7X Mark II - Version 1.2.0.0
PowerShot G9X Mark II - Version 1.1.0.0
03/30/2023: New firmware updates are available.
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.