09-01-2014 06:40 PM
Hello everybody!
I am from Costa Rica and this is the first time that I post something here.
Yesterday I dropped my mark iv with the old version 600f/4 and thank God nothing happened to the lens but the camera shows a crack on the lower part and the small LCD, the battery is also broken but the camera seems to be working with no problem. We don't have a Canon repair shop in my country and I wondered if Canon can put a new alloy body and LCD on this camera?
MANY THANKS FOR YOUR REPLY!
JuanKgigo
09-01-2014 07:58 PM
09-01-2014 08:01 PM - edited 09-02-2014 01:40 PM
Thanks cicopo.
The crack is visitble and the LCD is broken also, still working but broken and as it can be seen, the battery compartment is also twisted.
09-01-2014 08:08 PM
Agree with your assessment. Hopefully a Canon moderator can set you up with a service depot's address.
09-01-2014 08:15 PM
Many thanks cicopo!
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.