Brand New 5D mkIII Bizarre viewfinder issue
![Kenan171 Kenan171](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-29-2014 11:14 PM
I have a brand new 5d MKIII, that arrived today. I took it out of the box, and put my (also) brand new 24-70 L series on it. Looking thru the viewfinder, I cannot get the lens to manually focus. I try the lens on a different body, it's working properly. I try adjusting the diopter of the viewfinder. It makes no difference.
Ok, I think, I'll try autofocus. I put a battery in the camera and boom!, everything is pin sharp. Great, I think, so I adjust the viewfinder using the focus points then take the battery out to continue charging it. Instantly, the problem returns.
Does anyone have any idea what's going on?
Thanks!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2014 01:09 AM
If you look at the lens, you'll see a window indicating the focus distance. If you rotate the focus ring while looking at the window, you should see the distance changing (unless you hit the focus limit in either direction... at which point the clutch on the flcus ring will allow it to slip without harming the lens).
Are you able to see the focus distance indicator move when you rotate the focus ring? I'm wondering if perhaps the clutch on your lens is excessively loose.
5D III, 5D IV, 60Da
![Kenan171 Kenan171](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2014 01:16 AM
It's not a lens issue. It's a viewfinder issue.
I've since discovered that there is an LCD overlay in the Viewfinder, and without a battery in the camera it causes the VF to go dark and soft. Annoying, but not a major problem.
Thanks.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2014 11:45 AM - edited 05-30-2014 11:45 AM
It's the same for 7D also. But I don't think why it should be annoying since I don't think there is any point of focus adjusting f when there is no battery in the camera. How can you take photo?
Weekend Travelers Blog | Eastern Sierra Fall Color Guide
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2014 11:46 AM
5D III, 5D IV, 60Da
![Kenan171 Kenan171](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
05-30-2014 01:25 PM
Thanks Tim. On my 5D, I don't get even the dashed circle without the battery.
This morning I set the camera (with a battery in it) up on a tripod and framed up on the garden. Perfectly sharp. Then while looking the VF, I removed the battery. Instantly the VF gets about 2 stops darker and goes totally soft. The manual warns about the VF getting darker, but says nothing about the softness.
@hsbn There is no point focusing a camera without a battery if you are taking stills, but if you are shooting video, it is often useful to be able to see your frame without the camera being powered.
![amfoto1 amfoto1](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-03-2014 10:07 PM - edited 06-04-2014 01:50 AM
There is no point in removing the battery. Without it, you can't shoot stills or video or do anything with the camera at all.
There is nothing bizarre about the viewfinder in your camera.
The 7D, 70D, 5DIII and 1DX all use a transmissive, active matrix LCD as a focus screen. This is what allows the AF system to be displayed in different configurations, allows a composition grid to be turned on and off when wanted, etc.
When the camera has power - i.e. the battery installed - even if it's "turned off" at the power switch, the screen stays bright and in focus. The only time it dims down and blurs is when you remove the battery.
But, without a battery the camera is little more than an expensive paperweight. You can't do anything with it, without the battery installed. It's fully electronic and completely battery dependent. So you really just need to stop removing the battery. In fact you might want to consider getting a spare batt to have charged up and ready to swap out when needed.
***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM
![cale_kat cale_kat](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-04-2014 12:54 AM
To the OP, You might want to reconsider "popping out" the battery if you don't first turn off the camera. It could corrupt the memory card or worse.
![amfoto1 amfoto1](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-04-2014 01:45 AM
@cale_kat wrote:To the OP, You might want to reconsider "popping out" the battery if you don't first turn off the camera. It could corrupt the memory card or worse.
Nah, I've done hundreds of battery changes, lens changes, memory card changes without turning the camera off first. It's not a problem. In fact, the moment you open the battery door, the camera is completely powered down... There's a microswitch on the battery cover door that shuts it off. There's a similar microswitch on the memory card door. So it really doesn't matter if you turn the camera off at the switch or not.
I hardly ever turn my cameras off... have to conciously make myself do it from time to time, in order to run the automatic sensor cleaning.
***********
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM
![cale_kat cale_kat](https://community.usa.canon.com/html/assets/GenericUser.png)
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
06-04-2014 10:24 AM
To the OP, Canon describes the dimming of the viewfinder on page 30 of your manual.
![](/skins/images/72AEFF17E4107F07EBC227070130C517/responsive_peak/images/icon_anonymous_message.png)