03-02-2021 07:23 AM
Hi Guys
I am new to the photography.
I have a Canon 800D
The autofocusing was working with no issues so when in the viewfindered I half clicked and there would be the squares with the focused area that the camera has chosen.
I have manually overriden this by selecting the focus override button at the top and moving this around however, since I ahve done this I cannot get the autofocusing back.
The lense is set to RF BTW
Any help would be appreciated.
David
Solved! Go to Solution.
03-02-2021 08:19 AM
Found the issue. The auto AF selection was set to manual. changed to aut AF and I have the auto focus back.
03-02-2021 08:14 AM
Have you tried AF in both the optical viewfinder and in LiveView?
03-02-2021 08:19 AM
Found the issue. The auto AF selection was set to manual. changed to aut AF and I have the auto focus back.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.