01-15-2021 04:59 AM
I have AF point display set in my R5 but the only way I can get it to work is by pressing the AF button and the shutter button at the same time ,. Is there a way to achieve this without involving the AF button, I have back button focus enabled. What I wish to do is set focus, activate the shutter with my remote without touching the camera during exposure as I do a lot of shooting in low light with long exposures and use a remote switch to avoid camera shake .
Solved! Go to Solution.
01-15-2021 08:51 AM
Disable BBF. Done. Save it as a custom shooting mode for when you use the remote.
01-16-2021 12:35 AM
Thanks for replying, so basically there is no way to set up the way
I would like it then.
01-16-2021 06:30 AM
Corrrect. A remote shutter control is exactly that, a remote shutter button.
01-15-2021 08:51 AM
Disable BBF. Done. Save it as a custom shooting mode for when you use the remote.
01-16-2021 12:35 AM
Thanks for replying, so basically there is no way to set up the way
I would like it then.
01-16-2021 06:30 AM
Corrrect. A remote shutter control is exactly that, a remote shutter button.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.