06-18-2014 12:54 PM
My Canon EOS 7D is not turning itself off even though I have auto power off set for one minute. I think this problem began after I added a battery grip to the camera. Has anyone else had this problem?
06-20-2014 01:32 AM
Is it a Canon battery grip, or a third party? I ask because I've heard of some strange things occuring when using non-OEM battery grips.
If it's a Canon battery grip, I'd try "rebooting" the camera to see if that clears the problem. Do you know how to do that? If not, it's pretty easy. Just remove all the batteries (including the date/time battery), turn the camera on and press the shutter release button once. It won't fire, but this will drain all remaining power from the system and force the camera to reboot. Put the batteries back in and check to see if the date/time needs to be reset... if so, you got a good reboot. (You might have to reset some of your other settings, too.)
Hopefully that helps. Otherwise, I'm at a loss.
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM
06-20-2014 03:43 PM - edited 06-24-2014 04:12 AM
My Canon EOS 7D is not turning itself off even though I have auto power off set for one minute. I think this problem began after I added a battery grip plr to the camera. Has anyone else had this problem?
I too have the same issue. I am really confused about what to do. Please let me know if you find a viable solution. 🙂
06-26-2014 07:46 AM
Update: First, it is a Canon battery grip. I was able to determine it was not the cause of the problem, because the problem persisted even without the grip attached.
I e-mailed Canon tech support, who at first misunderstood my question and thought I just had a rapid battery discharge issue. They suggested rebooting to see if that solved the discharge problem. It did not. I already knew why the battery was draining so fast, because the camera wouldn't turn itself off. So they recommended I send it to Canon factory service. Which I did.
Turns out the problem was a bad main circuit board, and the solution was to replace the circuit board. That ain't cheap, but it ws necessary. I thought about not getting it replaced and just trying to learn to turn the camera off manually more often, but I figured if the circult board was bad something else would randomly go wrong eventually.
So I expect the camera back today, and I expect it to work just fine. I should know better about expectation, but there you are.
Hope this is helpful to someone else....
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 220.127.116.11
PowerShot SX420 IS - Version 18.104.22.168
PowerShot 620 HS - Version 22.214.171.124
PowerShot SX720 HS - Version 126.96.36.199
PowerShot G1X Mark III - Version 188.8.131.52
PowerShot G7X Mark II - Version 184.108.40.206
PowerShot G9X Mark II - Version 220.127.116.11
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.