03-27-2018 01:23 PM
I've been using a Mark ii 7D for a while now for video, and sometimes after a while the shutter clicks and it stops recording. Attached is a video from an event i was filming last week and you can hear the 7D (not the camera used for this video) clicking rapidly, it does it without being touched, and when being turned on, and when pressing the video record button. I can't seem to find a way to prevent this. We switched cards, batteries and let its sit for a minute but nothing stopped. I didnt check it again until monday and it worked just fine. Does anyone have any ideas?
03-28-2018 09:12 AM
@EToddwrote:I've been using a Mark ii 7D for a while now for video, and sometimes after a while the shutter clicks and it stops recording. Attached is a video from an event i was filming last week and you can hear the 7D (not the camera used for this video) clicking rapidly, it does it without being touched, and when being turned on, and when pressing the video record button. I can't seem to find a way to prevent this. We switched cards, batteries and let its sit for a minute but nothing stopped. I didnt check it again until monday and it worked just fine. Does anyone have any ideas?
If it happens randomly, it suggests that you may need a faster card. If it happens predictably, it could be running out of either minutes or space, either of which would force it to start over (with a new session or a new file, respectively).
03-28-2018 09:15 AM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.