11-16-2014 09:48 AM
Initially just canvassing opinion/"putting it out there..."
So far I've been delighted with my 7D Mk II - it improves over my 7D and 70D in every area that matters to me.
Except...
Whereas those cameras both work perfectly well with my Sigma 120-300mm f/2.8 and 70-200mm f/2.8 lenses attached and a 2x TC (Sigma or Canon Mk II) between them, my 7D mk II over-exposes by almost two stops with the same lens/TC combos.
Every time.
In any exposure mode.
1.4x TCs from Canon, Sigma and Kenko work perfectly with the 7D Mk II and the SIgma lenses; but with either 2x, exposure is all to hell.
I can get round this easily enough by dialing in -1.75 EC, but it seems clear enough that this is something that needs to be addressed - presumably via a firmware update.
Anyone else?
11-16-2014 04:30 PM - edited 11-16-2014 04:31 PM
Just tried my 70-200 2.8 mk2 and 2x extender (Canon) mk3 and no problem, exposure fine.
George.
Oops, just seen you are using a Siggy 70-200, so my reply may not be totally relevant..
11-17-2014 01:43 AM
No, it's helpful, George - it points at the Sigmas as being the issue.
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.