12-12-2016 08:43 AM
I have been using both my Eros cameras tethered to Lightroom using the same laptop setup and tether tools cable.
recently during several sessions I found that after the first few exposures the preview that pops up on camera screen was not there and later that the photos were not written to the cf card. Luckily the images were on the tethered laptop in the proper folder.
Has happened with two different cards
I format cards with camera after downloading images to workstation
have not changed anything in my work flow
so far seems to be writing to card normally when not tethered.
Does anyone have ideas?
12-12-2016 06:08 PM
@blayson wrote:I have several, Main two I use are
Lexar Professional 1000x 16Gb
and Sandisk Extreme Pro 16Gb
I have the camera format whenever I have downloaded, before next session
Both are a couple of years old.
I never shoot them completely Full, I usually download after each photoshoot
I'm not sure what a Low Level Format is??
Those cards sound like they're fine. It is unlikely that every card would fail at once, not unless the camera was compromising them, which again is unlikely.
Resetting the camera clears settings like Long Exposure Noise Reduciton, High ISO Noise Reduction, etc. Some settings can cause a camera to sit there "BUSY" while it processes image. Try taking some pictures in Green Square [A} mode.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.