10-09-2015 02:33 AM
Hi,
I noticed when filming with my Canon MkIII that the footage was strobbing/flashing (as if quickly switching between two exposures). Also the LCD screen switches between two exposures, perhaps every 5 seconds or so. It took me a while but I realised this only occurs when the camera is in manual mode and the iso is set to a value (not on Auto). I've tried everything, re-set all my preferences etc.. But the problem persists.
Has anyone experienced a similar issue, or have any idea as to what could be causing this?
Many thanks,
Marc
10-09-2015 04:22 AM
10-09-2015 01:41 PM
Hi Peter,
Thanks for your response. Yes I just tried filming with no lens and I get the same result..
marc
10-09-2015 01:48 PM
Can you upload a sample at perhaps youtube or here?
10-10-2015 10:18 PM
I managed to fix the problem.
I have magic lantern installed on my camera to enable raw filming, there was a setting in there accidentally turned on. 'HDR shooting' which I'm guessing shoots two different exposures simultaneously..
Thanks,
Marc
10-11-2015 02:35 AM
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.