10-08-2019 08:23 PM
Hello Canon users. When I transfer images to my Mac it imports two of the same image. If I take one of the cards out of the camera first it is ok. So I must be storage the image on both cards, just don't know how to correct this on my camera? Any ideas?
Cheers
Solved! Go to Solution.
10-08-2019 10:40 PM
I don't have a 5D owner's manual but the setup is similar for most of the current Canon cameras. Under the menu setting for record function (under the "wrench/tool" icon for most current bodies), you will have several choices of whether you want to save images to one or both cards simultaneously and what format is used for each (RAW on both cards, RAW on one, JPG on the other, etc.)
I may be living dangerously but I have never bothered with recording to both cards. I primarily shoot sports but if I was a wedding photographer I would use that dual record option.
Rodger
07-29-2020 09:59 AM
MY ISSUE IS RESOLVED.
The duplication occurred only when I had cards in both slots, even though I was only writing to one card. I DID A MARK IV firmware update and it resolved the duplication when connecting USB to import, even if I have both cards in slots and only using one.
07-30-2020 04:00 AM
Cool. Thanks so much.
Will try, and report back should the issue still persist...
t
07-30-2020 01:42 PM
Yup, that fixed it.
Updated to firmware version 1.2.1 today, and that took care of it.
Thanks!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.