04-05-2024 07:37 PM
While shooting today at 400mm,I was unable to retract the zoom to under approximately 280mm I tried taking the body off, turning the IS, AF, etc off but nothing It glides easily from 400>280 the abruptly stops I looked through the back of the lens and felt for any obstruction but there isn’t one I tried adding my 1.4x tc but no change The lens is operating perfectly at 280-400 What should I do?
04-05-2024 09:41 PM - edited 04-05-2024 09:44 PM
Greetings,
Have you tried tilting the lens at different attitudes? Is anything loose or rattling around? Don't force the lens to zoom or MF. If you cannot move the zoom with normal (gentle) firm twist, the lens should go to Canon for inspection.
~Rick
Bay Area - CA
~R5 C (1.0.7.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, ~RF 200-800 +RF 1.4x TC, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve Studio ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8 ~CarePaks Are Worth It
04-05-2024 09:44 PM
What could possibly be wrong ? I’m shooting pictures of burrowing owls in FL and zooming in and out, all of a sudden, I couldn’t retract the lens
04-05-2024 10:10 PM
Welcome to the forums1
The lens has a friction adjustment. Have you tried to adjust it?
04-05-2024 10:39 PM
Yes I can control the tightness from 280-400mm, I just can’t get it to close lower than 280mm
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.