09-01-2024 08:36 AM
Hello, I have the Canon R5 II, along with the RF 24-105 2.8 and for some reason, I am not able to adjust the aperture in either manual or Aperture Priority mode from the camera. I can change the aperture via the dial on the lens, but not from the camera itself. I don't have any seetings for the control ring or the buttons on the lens (I actually have them off). This only happens with the 24-104 2.8 lens and not any of my other Canon lenses.
Any idea why I can't change the aperture via the camera when this lens is attached? I didn't have this issue with my R5.
09-01-2024 10:14 AM
Make sure aperture ring is set to A on the lens. The aperture ring overrides the setting on the camera.
09-01-2024 11:39 AM
Ahh!I didn't realize I had changed that and that was the issue. Thank you very much!!
07/01/2024: New firmware updates are available.
06/06/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.4.0
Speedlite EL-5 - Version 1.1.0
Speedlite Transmitter ST-E10 - Version 1.1.0
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.