I am using the 5d Mark ii with a canon 2.8/20mm lens. Problem I am having is with a third pary 3d software and integrating Tiff files.
The dialogs are being thrown up by the 3rd party TIFF library that are being used and indicate some issues with the EXIF data embedded in the image file by the camera. It has to do with my lens specification reading the minimum focal length.
I have done a bit of research on this and found this information from here: http://www.cipa.jp/english/hyoujunka/kikaku/pdf/DC-008-2010_E.pdf
LensSpecification
This tag notes minimum focal length, maximum focal length, minimum F number in the minimum
focal length, and minimum F number in the maximum fo
cal length, which are specification information
for the lens that was used in photography. When
the minimum F number is unknown, the notation is
0/0.
Tag = 42034 (A432.H)
Type = RATIONAL
Count = 4
Default = None
Value 1 := Minimum focal length (unit: mm)
Value 2 : = Maximum focal length (unit: mm)
Value 3 : = Minimum F number in the minimum focal length
Value 4 : =
So a couple of questions....why is my camera not setting this value for me? Is there a way that I can manually set the value?
Any thoughts appreciated!
